|
|
| Imager |
1/2.8-type Exmor R CMOS sensor |
| Effective Picture Elements (Pixels) |
1945 x 1097 (2.13 MP) |
| Lens |
30x Zoom4.3 mm to 129 mmF1.6 to F4.7 |
| Field of View (FOV) |
2.3° to 65° |
| Focus |
Automatic with manual override |
| Iris |
Automatic with manual override |
| Digital Zoom |
12x |
| Video performance – Sensitivity |
|
| (3100K, reflectivity 89%, 1/30, F1.6, 30 IRE) |
|
| Color |
0.0077 lx |
| Mono |
0.0008 lx |
|
|
| Gain control |
AGC, Fixed |
| Aperture Correction |
Horizontal and vertical |
| Electronic Shutter Speed (AES) |
1/1 sec to 1/10000 sec (22 steps) |
| Signal-to-Noise Ratio (SNR) |
>55 dB |
| Backlight compensation (BLC) |
On, Off |
| White balance |
2000 K to 10,000 K ATW, AWB Hold, Extended ATW, Manual, Sodium Lamp Auto, Sodium Lamp |
| Day/Night |
Monochrome, Color, Auto |
| Intelligent defog |
Improves visibility when viewing foggy or other low-contrast scenes. |
| High dynamic range (HDR) |
|
| 25/30 fps |
120 dB |
| 50/60 fps |
90 dB |
|
|
| Drive Unit |
Brushless, integral pan/tilt motor drive |
| Pan Range |
360° continuous rotation |
| Tilt Angle |
Without illuminators (camera upright): 290°Without illuminators (camera inverted): 250°With illuminators: 186.6° |
| Tilt Range |
Upright unit: -55° – +90°Canted unit: -90° – +90° |
| Variable Pan Speed |
0.8°/second – 120°/second |
| Variable Tilt Speed |
0.8°/second – 90°/second |
| Intelligent Tracking Speed |
0.8°/second – 120°/second |
| Pre-position Speed |
120°/second |
| Preset Accuracy |
0.17° (typical) |
| Proportional Pan / Tilt to Zoom |
Yes |
| Zoom Movement Speed |
<5 seconds (optical Wide to optical TELE) |
| <7.5 seconds (optical Wide to digital TELE) |
|
| Audible Noise |
<65 dB |
|
|
| Input Voltage |
21-30 VAC, 50/60 Hzand/orEthernet High PoE cable connection (56 VDC) |
| Power Consumption |
Without illuminator: 40 W maximumWith illuminator: 70 W maximum |
|
|
| Camera Setup/Control |
Via Internet Explorer web browser version 7.0 or later, Bosch Configuration Manager, Bosch Video Management System (BVMS), Bosch Video Client (BVC), or support for third party software |
| Software Update |
Network firmware upload |
| Serial protocols |
Bosch OSRD, Pelco P/D, and Forward Vision (Note: For Pelco and Forward Vision protocols, a separate license (MVS-FCOM-PRCL) is required.) |
| Standards / Video compression |
H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG |
| Streaming |
Four (4) streams with individually configurable frame rate and resolution: Two (2) independently configurable H.264 recording streams Two (2) non-recording streams (profiles) |
| When the option in field “Property” for Stream 1 is: |
The available options in field “Property” for Stream 2 are: |
| H.264 MP SD |
– H.264 MP SD |
| H.264 MP 720p fixed |
– H.264 MP SD – H.264 MP 720p fixed – H.264 MP 400×720 upright (cropped) – H.264 MP D1 4:3 (cropped) – H.264 MP 1280×960 (cropped) – H.264 MP 640×480 |
| H.264 MP 1080p fixed |
– Copy Stream 1 – H.264 MP SD – H.264 MP 720p8/10 fixed – H.264 MP 1080p4/5 fixed – H.264 MP 400×720 upright (cropped) – H.264 MP D1 4:3 (cropped) – H.264 MP 640×480 |
| H.264 MP 720p50/60 fixed |
– Copy Stream 1 – H.264 MP SD – H.264 MP 720p6/7 fixed – H.264 MP 400×720 upright (cropped) – H.264 MP D1 4:3 (cropped) – H.264 MP 640×480 |
| Non-recording profiles |
Two (2) streams, I-frame only Options are:- HD Image Optimized- HD Balanced- HD Bit Rate Optimized- SD Image Optimized- SD Balanced- SD Bit Rate Optimized- DSL Optimized- 3G Optimized |
| Resolution (H x V) |
|
| 1080p HD |
1920 x 1080 |
| 720p HD |
1280 x 720 |
| 432p SD |
768 x 432 |
| 288p SD |
512 x 288 |
| 144p SD |
256 x 144 |
| Protocols |
IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication |
| Ethernet |
10BASE-T/100BASE-TX, auto-sensing, half/full duplex |
| Encryption |
TLS 1.0, SSL, DES, 3DES, AES |
| Ethernet connector |
RJ45 |
| Connectivity |
ONVIF Profile S, Auto-MDIX |
| GOP Structure |
IP, IBP, IBBP |
| Data Rate |
9.6 kbps to 6 Mbps |
| Overall IP Delay |
240 ms (typical) |
|
|
| Sectors / Title |
16 independent sectors with 20 characters per title |
| Privacy Masks |
24 individually configurable privacy masks |
| Virtual Masks |
24 individually configurable masks to hide parts of the scene (background motion such as moving trees, pulsating lights, busy roads, etc.) which should not be considered for flow analysis to trigger Intelligent Tracking. |
| Prepositions |
256, each with 20 characters per title |
| Guard Tours |
Two (2) types of tours: Recorded tours – two (2), maximum total duration 30 minutes (depending on amount of commands sent during recording) Preset tour – one (1), consisting of up to 256 scenes consecutively, and (1) customized up to 64 scenes |
| Supported Languages |
English, Czech*, Dutch, French, German, Italian, Polish, Portuguese, Russian*, Spanish, Japanese, Chinese * Available with separate language upload |
| Power, Network |
Without illuminator: RJ45 100BASE-TX Ethernet High PoE midspan – 60 W (NPD-6001A) or 95 W (NPD-9501A) With illuminator: High PoE 95 W midspan (NPD-9501A)* |
| Power, Camera |
24 VAC (power supply) |
| Video and Control |
RJ45 100BASE-TX Ethernet RS-485 Simplex 9600 baud (dedicated for MIC-ALM-WAS-24) |
| Alarm/Washer |
3-wire RS-485 |
| * Must purchase either NPD-9501A or VIDEOJET connect 7000 in order to use the High PoE solution. |
|
|
|
| Ingress Protection Rating/ Standard |
IP68NEMA 6P, when using installed MIC-DCA or MIC wall mount IP67 (moisture and dust) rating on connectors in the base of the camera |
| External Mechanical Impact (IK Code or Impact rating) |
IK10 |
| Operating Temperature |
-40 °C to +60 °C (-40 °F to +140 °F) |
| Storage Temperature |
-60 °C to +70 °C (-76 °F to +158 °F) |
| Humidity |
0-100% |
| Wind Load |
241 km/h (150 mph) (sustained)(Gusts up to 290 km/h (180 mph)) Effective Projected Area (EPA): 0.044m² (0.47 ft²) |
| Vibration |
IEC 60068-2-6, Test Fc: Vibration (sinusoidal), 20m/s² (2.0g)Sinusoidal vibration test IAW MIL-STD-167-1A |
| Shock |
IEC 60068-2-7, Test Ea: Shock, 40g, 6ms Half Sine ImpulseMedium weight Hammer Shock IAW MIL-S-901D |
| Dimensions(W x H x D) |
Without illuminator accessory or sunshield: Upright, Inverted:217.75 mm x 368.89 mm x 178.33 mm(8.57 in. x 14.52 in. x 7.02 in.) Canted:217.75 mm x 330.96 mm x 239.68 mm(8.57 in. x 13.03 in. x 9.44 in.) Without illuminator accessory, but with sunshield: Upright, Inverted:217.75 mm x 372.20 mm x 178.33 mm(8.57 in. x 14.65 in. x 7.02 in.) Canted:217.75 mm x 334.27 mm x 239.68 mm(8.57 in. x 13.16 in. x 9.44 in.) With illuminator accessory: Upright, Inverted:217.75 mm x 439.91 mm x 178.33 mm(8.57 in. x 17.32 in. x 7.02 in.) Canted:217.75 mm x 401.98 mm x 239.68 mm(8.57 in. x 15.83 in. x 9.44 in.) |
| Weight |
6.7 kg (14.7 lb) |
| Window |
Tempered flat glass |
| Construction Material |
Cast solid aluminum |
| Window Wiper |
Standard, long-life silicone wiper |
| Sunshield(to prevent sun load in hot climates) |
Optional; sold separately |
| Canting |
On-site canting functionality |
| Color |
Black (RAL 9005) |
| Color |
White (RAL 9003) |
| Color |
Grey (RAL 7001)Available in specific regions only. |
| Standard Finish |
Corrosion protection surface treatment with powder coat paint, sand finish |
Reviews
There are no reviews yet.