Superb quality indoor/outdoor IP PTZ dome camera. 720p HD resolution; 30x optical zoom; IVA; PoE; iSCSI/SD; multiple pre-programmed user modes; H.264 quad-streaming (CPP4); IP66; pendant mount, clear bubble.
AUTODOME IP 7000 HD
Features
- High-resolution, full HD PTZ camera with 1080p25/30 (2MP) resolution and 20x zoom
- Intelligent Tracking and alarm rules engine with on-board Intelligent Video Analytics (IVA)
- Enhanced system flexibility with dual recording options (iSCSI, SD card) and dual power source options (High Power over Ethernet (High PoE) / 24 VAC)
- Fully configurable quad streaming with individually configurable HD streams, based on Bosch’s Common Product Platform (CPP4)
- Easy and intuitive installation with multiple pre-configured user modes that allow users to select the camera configuration that is ideal for their applications
Specifications
Imager1/2.8″ progressive scan CMOS
| Total sensor pixels | 1945 x 1109 (2.16 M pixels) |
| Effective pixels | 1080p: 1984 (H) x 1105 (V) (approximately 2.38M pixels)720p: 1344 (H) x 745 (V) |
| Lens | 20x optical zoom4.9 mm (wide) to 94.0 mm (tele) (F 1.6 to F 3.5) |
| Field of View | 59.5° (wide) to 3.3° (tele) |
| Focus | Auto (Sensitivity: normal, low), One-push AF, Manual, Interval AF, Zoom Trigger AF, Focus compensation in ICR on |
| Digital Zoom | 12x |
| Sensitivity / Minimum Illumination (typical) | 30 IRE , 50 IRE |
| Day Mode (Color) | |
| Fixed shutter 1/30, High Sensitivity mode On | 0.06 lux , 0.2 lux |
| Fixed shutter 1/30, High Sensitivity mode Off | 0.26 lux , 0.83 lux |
| Fixed shutter ¼, High Sensitivity mode On | — , 0.03 lux |
| Night Mode (Black and white) | |
| Fixed shutter 1/30, High Sensitivity mode On | 0.033 lux , 0.08 lux |
| Fixed shutter ¼, High Sensitivity mode On | 0.0026 lux , — |
| Electronic Shutter Speed | 1/25 sec to 1/15,000 sec (12 steps) |
| Signal-to-noise Ratio(SNR) | >50dB (AGC off) |
| Noise Reduction | Intelligent Dynamic Noise Reduction |
| Backlight Compensation (BLC) | On/Off |
| Intelligent Defog | Intelligent Defog automatically adjusts parameters for best picture in foggy or misty scenes (switchable)” |
| White Balance | Auto, ATW, Indoor, Outdoor, Outdoor Auto, Sodium Vapor Lamp (Fix/Auto/Outdoor Auto), One-push, Manual |
| Day/Night | Mechanical switchable IR filter (Auto/On/off) Monochrome |
| In-Ceiling | Pendant |
| Pan Range | 360° cont. , 360° cont. |
| Tilt Angle | 1° above horizon , 18° above horizon |
| Pre-position Speed | Pan: 400°/sTilt: 300°/s , Pan: 400°/sTilt: 300°/s |
| Pan/Tilt Modes | |
| Turbo Mode(Manual Control) | Pan: 0.1°/s – 400°/sTilt: 0.1°/s – 300°/s |
| Normal Mode | 0.1°/s-120°/s , 0.1°/s-120°/s |
| Preset Accuracy | ± 0.1° typ. , ± 0.1° typ. |
| In-Ceiling | Pendant |
| Input Voltage | 21-30 VAC, 50/60 Hz; (class II) High PoE (with Bosch Midspan (NPD-6001A); required to power the heater) PoE+ (IEEE 802.3at, class 4 standard)(when used indoors, not powering the heater) |
| Power Consumption,typical | 24 W / 44 VA , 60 W / 69 VA (heaters on)or24 W / 44 VA(heaters off / without heater connected in power supply box for indoor applications) |
| Protection on Alarm Inputs | Peak current 17 A, peak power 300 W (8/20 μs) |
| Protection on Alarm Outputs | Peak current 2 A, peak power 300 W (8/20 μs) |
| Protection on Relay Output | Peak current 7.3 A, peak power 600 W (10/1000 μs) |
| Protection on Power Input (Dome) | Peak current 7.3 A, peak power 600 W (10/1000 μs) |
| Protection on PowerOutput (Arm Power Supply) | Peak current 21.4 A, peak power 1500 W (10/1000 μs) |
| 10/100 EthernetData Lines | Peak current 14 A, peak power 200 W (8/20 μs) |
| Camera Setup/Control | Via web browser (such as Internet Explorer version 7.0 or later), Bosch Configuration Manager, Bosch Video Management System (BVMS), Bosch Recording Station (BRS), or Bosch Video Client (BVC) |
| Software Update | Network firmware upload |
| Video compression | H.264 (ISO/IEC 14496‑10), M‑JPEG |
| Encoding / Streaming | |
| H.264 | MJPEG |
| Scenario | |
| Stream 1 | Stream 2 , Stream 3 , Stream 4 |
| 1 | Full HD 1080p30 , Full HD 1080p5 , I-frameonly fromStream 1 , 1080p |
| 2 | Full HD 1080p30 , HD 720p10 , I-frameonly fromStream 1 , 1080p |
| 3 | Full HD 1080p30 , Downscaledstream , I-frameonly fromStream 1 , 1080p |
| 4 | Full HD 1080p30 , Copy of Stream 1 , I-frameonly fromStream 1 , 1080p |
| 5 | HD 720p60 , HD 720p8 , I-frameonly fromStream 1 , 720p |
| 6 | HD 720p30 , HD 720p30 , I-frameonly fromStream 1 , 720p |
| 7 | HD 720p30 , Downscaledstream , I-frameonly fromStream 1 , 720p |
| 8 | Downscaledstream , Downscaledstream , I-frameonly fromStream 1 , 1080p |
| GOP Structure | IP, IBP, IBBP |
| Data Rate (Range) | 9.6 kbps to 10 Mbps (per stream) |
| Overall IP Delay | 240 ms |
| Resolutions (H x V)) | |
| HD Resolutions | |
| 1080p HD | 1920 x 1080 |
| 720p HD | 1280 x 720 |
| Down-scaled SD streams | |
| 432p SD | 768 x 432 |
| 288p SD | 512 x 288 |
| 144p SD | 256 x 144 |
| Corridor mode | 400 x 720 |
| D1 4:3 cropped | 704 x 480 |
| Ethernet | 10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45 |
| Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (V1, MIB II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication |
| Advanced Networking | IPv6, QoS |
| Audio | |
| Standard | G.711, 8 kHz sampling rateL16, 16 kHz sampling rateAAC, 16 kHz sampling rate |
| Signal-to-Noise Ratio | >50 dB |
| Audio Streaming | Bidirectional (full-duplex) |
| Memory Card Slot | User-supplied SD/SDHC/SDXC memory card (maximum 2TB – SDXC) |
| Recording | Continuous recording of video and audio, alarm/events/schedule recording |
| VG4-SFPSCKT | |
| Description | Fiber Optic Ethernet Media Converter kit 6.Requires a small form-factor pluggable (SFP) module (sold separately). |
| Data Interface | Ethernet |
| Data Rate | 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port |
| Compatible Receiver | CNFE2MC |
| Installation | Installed inside a VG4-A-PA0, VG4-A-PA1, VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2 power supply box with supplied mounting hardware |
| 6. Kit available separately and must be installed inside the AUTODOME power supply box. | |
| SFP Modules | |
| Description | Interchangeable modules available for use with MMF or SMF optical fiber. |
| Data Interface | Ethernet |
| Data Rate | 10/100 MbpsIEEE 802.3 Compliant |
| Weight (all SFP modules) | 0.23 kg (0.05 lb) |
| Dimensions (LxWxH) | |
| SFP-2, SFP-3 | 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.) |
| SFP-25, SFP-26 | 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.) |
| Type | Connector , Wavelength (transmit / receive) , Max. Distance |
| SFP-2 | MMF , Duplex LC , 1310 nm / 1310 nm , 2 km (1.2 miles) |
| SFP-3 | SMF , Duplex LC , 1310 nm / 1310 nm , 20 km(12.4 miles) |
| SFP-25 | MMF , Single SC , 1310 nm / 1550 nm , 2 km(1.2 miles) |
| SFP-26 | MMF , Single SC , 1550 nm / 1310 nm , 2 km(1.2 miles) |
| Fiber Compatibility | |
| Optical Fiber Compatibility, MMF | 50/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651. |
| Optical Fiber Compatibility, SMF | 8–10/125 µm SMF. Must meet or exceed fiber standard ITU-T G.652. |
| Optical Distance Specifications | Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate. |
| Sectors/Titling | 16 independent sectors with a 20-character title/sector |
| Masking | 24 individually configurable privacy masks |
| Pre-positions | 256, each with a 20-character title |
| Guard Tours | Two (2) types of tours: Recorded tours – two (2) Preset tour – one (1), consisting of up to 256 scenes, consecutively |
| Supported Languages | English, Chinese, Dutch, French, German, Italian, Japanese, Polish, Portuguese, and Spanish |
| Power, Camera | RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE)) or PoE+ (IEEE 802.3at, class 4 standard)21-30 VAC, 50/60 Hz |
| Power, Heater | RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE))21-30 VAC, 50/60 Hz |
| Video and Control | RJ-45 10/100 Base-TX Ethernet |
| Alarm Inputs (7) | 2 supervised; 5 non-supervisedProgrammable for “normally open” or “normally closed” |
| Alarm Outputs (4) | 1 dry contact relay; 3 open collector/transistor outputs32 VDC @ 150 ma max. |
| Audio | 1 x mono line in, 1 x mono line out |
| Signal line in | 12 kOhm typical, 1 Vrms max |
| Signal line out | 1 Vrms at 1.5 kOhm, typical |
| In-Ceiling(with acrylic bubble) | Pendant(with acrylic bubble) |
| Ingress Protection Rating/ Standard | IP54, Plenum rated , IP66,,NEMA 4X |
| Operating Tempera-ture (with heater wired) | -10 to +40 °C(+14 to +104 °F) , -34 to +74 °C(-30 to +165 °F)(in accordance with NEMA TS 2-2003 (R2008), section 2.1.5.1) -40 to +55 °C(-40 to +131 °F)(continuous operation) |
| Operating Tempera-ture (without heater wired) | -10 to +55 °C(+14 to +131 °F)(continuous operation) |
| Storage Tempera-ture | -40 to +60 °C(-40 to +140 °F) , -40 to +60 °C(-40 to +140 °F) |
| Operating Humidity | 0% to 90% RH, non-condensing , 0% to 100% RH, condensing 7 |
| NEMA TS 2-2003 (R2008), para 2.1.5.1 using fig. 2.1 test profile | -34 ºC to +74 ºC (-30 ºF to +165 ºF) |
| Dimensions | See dimensional drawings |
| Weight | |
| In-ceiling | 2.59 kg (5.71 lb) |
| Indoor/Outdoor Pendant | 3.07 kg (6.77 lb) |
| Bubble Size | 153.1 mm diameter (6.03 in.) |
| Construction Material | |
| Housing | In-ceiling: MagnesiumPendant: Cast aluminum |
| Bubble | In-ceiling: HD High-resolution acrylic Pendant: High-resolution acrylic |
| Standard Color | White (RAL 9003) |
| Standard Finish | Powder coated, sand finish |
| Bubbles | |
| In-ceiling | |
| Clear HD high-resolution acrylic | VGA-BUBHD-CCLA |
| Tinted HD high-resolution acrylic(Included with in-ceiling camera models.) | VGA-BUBHD-CTIA |
| Pendant | |
| Clear high-resolution acrylic(Included with pendant camera models.) | VGA-BUBBLE-PCLA |
| Tinted high-resolution acrylic | VGA-BUBBLE-PTIA |
| Clear rugged IK10-rated nylon | VGA-BUBBLE-IK10 |
| Pendant Arm Mounts | |
| Wall Arm (No Transformer) | VG4-A-PA0 |
| Wall Arm (120/230 VAC Transformer) | VG4-A-PA1 / VG4-A-PA2 |
| Pendant Arm with Wiring | VGA-PEND-ARM |
| Mounting plate for VGA-PEND-ARM | VGA-PEND-WPLATE |
| Trim skirt for VG4 Series Power Supplies | VG4-A-TSKIRT |
| Optional Mounting Plates for Arm Mounts | |
| Corner Mounting Plate | VG4-A-9542 |
| Mast (Pole) Mounting Plate | VG4-A-9541 |
| Pendant Pipe Mounts | |
| Pipe Mount Cap | VG4-A-9543 |
| Pendant Roof Mounts | |
| Roof (Parapet) Mount(VG4-A-9543 Pipe Mount Cap required. Available separately.) | VGA-ROOF-MOUNT(1.5-inch NPT tapered male threads) |
| Optional Mounting Plates for Roof Mounts | |
| Flat Roof Adapter for Parapet Mount | LTC 9230/01 |
| In-ceiling Support Kits | |
| Bracket for suspended or drop ceilings | VGA-IC-SP |
| Power Supplies | |
| High PoE Midspan 60W, single port, AC in | NPD-6001A |
| Outdoor Power Supply Box, no transformer | VG4-A-PSU0 |
| Outdoor Power Supply Box (120/230 VAC Transformer) | VG4-A-PSU1 / VG4-A-PSU2 |
| Fiber Optic Kit | VG4-SFPSCKT |
Enquires
[contact-form-7 id=”498″ title=”Enquiry”]
Reviews
There are no reviews yet.